***IMPORTANT - MEASURE YOUR RECESS BEFORE YOU ORDER!***
11 mm frames only fit recesses wider than 11 mm, Seconline will not replace screens ordered with the incorrect frame as they must be completely remade with all new stock.
Face Fixed: fitted to the face of the timber window sill; generally with 11mm PVC turnbuckles - available as an Add On when purchasing your screen.
Recess Fix: fitted into the recess provided by the window extrusion. These come to accommodate two types of flyscreen frames thicknesses; 11 mm (which is the most common) and 9 mm. Our flyscreens are industry standard 11 mm thick. If your window recess is 9mm we can accommodate this you must advise us of the recess width when placing your order.
Seconline also install spinger clips into our fly screen where requested. These can be purchased as an add on when purchasing your screen and are fitted to the screens at the time of manufacture.
MEASURING AN EXISTING SCREEN
Height: Measure the height left and right, record the shortest measurement.
Width: Measure from the outer edge of the frame top and bottom, record the shortest measurement.
MEASURING FOR A NEW SCREEN - FACE FIXED
Height: Measure the recess height left and right, record the shortest measurement.
Width: Measure the recess top and bottom, record the shortest measurement.
MEASURING FOR A NEW SCREEN - RECESS FIXED
Height: Not always, however in most cases the height recess at the bottom will be smaller in depth than the top.
Width: Again there will be variances in the depths of the recesses for different window manufacturers.