7 mm Diamond Window Screens

Left Side

Please enter your measurements

Right Side

Please enter your measurements

NEED HELP MEASURING?

Colour {{product.formData.colour.name}}

Colours are indicative only - for colour samples please contact info@seconline.com.au

Colours listed above are standard. For other colours please select the non standard colour addon below & enter your colour.

Dulux Colour chart available here.

Addons

Total

{{product.totalPrice | currency}}

WAS {{product.fullPrice | currency}}

You're saving {{product.discount | currency}}!

{{error}}

7 mm Diamond Window Screens 

Diamond Grilles online is what we do best!

Custom made 7mm Diamond Grille window screens made to your exact specifications.

The 7mm Diamond grille window screens come riveted to the frame, backed with fibreglass gauze.

Paw proof or midge mesh can be added as an alternative option - contact the office for a quote info@seconline.com.au

Note: Fitting screws not included.

Important: This product is a barrier safety screen only. For security screens see our Security Screens 316 Stainless Steel Mesh.

 

 ***IMPORTANT - MEASURE YOUR RECESS BEFORE YOU ORDER!***

11 mm frames only fit recesses wider than 11 mm, Seconline will not replace screens ordered with the incorrect frame as they must be completely remade with all new stock.

 Please view all videos and read all infomation before proceeding with your order.

YOU MUST MAKE YOUR OWN DEDUCTIONS - See the DIY Info Centre

 The sizes you provide will be the exact size we make your screen; if you are unsure please ask 1300 735 405.

FRAME

  • Available in 19 colours
  • Frame size: 11 mm x 31 mm 

GRILLE

  • Available in 19 colours

 

FRAME

  • Available in 19 colours
  • Frame size: 11 mm x 31 mm 

 

 

After you order your 7 mm Diamond window screen, all specifications are digitally cut, fabricated and packaged ready for shipment direct to your house via Regional Road Express. Once your screen is dispatched you will be emailed a connote number so you can track your order online. Please ensure you read our sites terms and conditions.

 

1. How to measure an existing screen:

If you have existing screens and they are a good fit, then the easiest way to measure for new ones is to remeasure your old ones, ensure that you measure the recess width and advise us if it varies from the industry standard width of 11 mm.

Note: Do not take measurements from the centre in case the screen is bowed.

Screen Width: Measure from the outer edge of the frame top and bottom, record the smallest measurement. Note: There should be maximum of 3 mm variation in the two lengths, if the variation is greater contact us to discuss solutions 1300 735 405.

Screen Height: Measure the height left and right, record the smallest measurement.

Recess Width: Using a solid ruler measure the width of your recess, advise us when placing your order if your recess width is other than 11 mm.

 

2. How to measure for a new screen (face fixed):

Note: The safest method of measuring is to fit the screen to the face of the window and this is sometimes the only option. You would then drill through the frame of the window surround, and screw or rivet in place.

Screen Width: Measure the recess top and bottom, record the smallest measurement.

Screen Height: Measure the height left and right, record the smallest measurement.

 

3. How to measure for a new screen (recess fixed) 1.1

Screen Width: Measure inside recess of windows where screen will be located, top and bottom then deduct 2-3 mm to allow fitting clearance and record the smallest measurement.     

Screen Height: Measure inside recess of windows where screen will be located, left and right then deduct 2-3 mm to allow fitting clearance and record the smallest measurement.

Recess Width: Using a solid ruler measure the width of your recess, advise us when placing your order if your recess width is other than 11 mm.

Recess Depth: Using a solid ruler measure the depth of your recess, advise us when placing your order if your recess depth is other than 11 mm.

1.1 

 

Pop Rivet Face Fix: 

Use a 3mm drill bit to pre-drill the holes then use 3mm x 15mm rivets to face fix the screens to the outside of the window frame.

Rivets should be placed 50mm away from each corner and space at least 30mm apart.
Pop Rivet Recess Fix:
Fit the screen into the recess, use a 3mm drill bit to pre-drill the holes, then use 3mm x 15mm through the recess and the window screen to fix into place.

Pop Rivet Face Fix: 

Use a 3mm drill bit to pre-drill the holes then use 3mm x 15mm rivets to face fix the screens to the outside of the window frame.

Rivets should be placed 50mm away from each corner and space at least 30mm apart.
Pop Rivet Recess Fix:
Fit the screen into the recess, use a 3mm drill bit to pre-drill the holes, then use 3mm x 15mm through the recess and the window screen to fix into place.

Q. Where do I measure for my window grilles?

A. Before you measure you need to establish where exactly how you are going to fix the grille to the window. There are two basic types of external fixing.

Recess fix: Our standard window grille frame is 11 mm thick at the outer wall. This is so they may be fitted into the same recess on a window as a fly screen. They can then be fixed in place by riveting or screwing to the window recess either internally or externally. As there are a large variety of window extrusions a decision has to be made by the person installing the screen.

Face fix: When there is no recessed area provided for a fly screen the grille is simply fitted to the face of the window frame either internally or externally by drilling through the frame of the window surround, and screwing or riveting in place. Great care must be given to not interfere with the operation of the window's action, E.g. Window spirals etc.

Measuring for a recess fix is difficult due to the many variations in styles. The simplest method is to remeasure the existing fly screen if it is a good fit, and a fix can be obtained. If this option is not available then you must be mindful of being able to fit the screen into the recess whilst still covering the window. Remember: Fly screens are flexible, security window screens are not.

Q. What colours do you have as standard?

A. Seconline's security screens are available in 18 standard colours. Refer to Product Details for our full colour chart.

Q. Can I have another colour if I am happy to pay extra?

A. Yes. Please email with sizes and quantities and we will provide a quote including powder coating.

The video below features the the window grille frame.

 

 

SHIPPING

Once your order is custom made to your specifications it is then packaged for shipment direct to your requested shipping address via Regional Road Express. Once dispatched you will be sent a connote number; see our Terms and Conditions page for estimated transit times.

From the time you place the order your item will be dispatched from our workshop within 10 to 15 working days*. Expected delivery time from date of order is five to ten working days, any delays due to Regional Road Express delivery will be communicated to you by our staff.

If you encounter any issues or have any questions during the ordering process please phone us on 1300 735 405, we are always happy to help.

* Pending availability of stock (Seconline will advise of any stock shortages that may extend the manufacturing time).

SHIPPING PARTNER

Do you have any feedback for us?

What our customers think...

{{item.title}}

{{item.title}} via {{item.source}}